GPPS

Products

Styrolution PS general purpose polystyrene resins are transparent polymers suitable for injection molding or extrusion applications. Uses for these products vary from food service and food packaging to refrigerator components, healthcare and diagnostic labware as well as XPS insulation.

Key Applications

Extrusion/ thermoforming foam sheet
Biaxially oriented sheet (OPS)
Medical labware
Foam extrusion
Blending resin

Key Properties

Transparency
Heat resistance
Medical

Brochures

Styrolution® PS Eco Efficiency (EMEA)

PDF | 965 KB | EN

Styrolution® PS Eco Efficiency (EMEA)

PDF | 946 KB | DE

INEOS Styrolution Product Selection Guide (Americas)

PDF | 525 KB | EN

Product Path Finder

Rigidity, clarity			Melt Flow Rate, 200 °C/5 kg [g/10 min]	Vicat Softening Temperature, B/1 ( 120 °C/h, 10N) [°F]	Tensile Modulus [psi x 10³]	Tensile Stress at Yield, 23 °C [psi]	Izod Notched Impact Strength, 23 °C (73 °F) [ft-lb/in]
High heat	High melt strength	Styrolution PS 1200/1201 TDS SDS	1.6	228	460	7600	0.4
Low residual styrene monomer content	Styrolution PS 1290/1291 TDS SDS	1.6	228	460	7600	0.4
Good balance of flow & strength	Styrolution PS 1300/1301 TDS SDS	3	223	460	7100	0.4
Good balance of strength, flow & heat resistance	Styrolution PS 1600 TDS SDS	6	223	430	6800	0.4
Good balance of flow, strength & set-up properties	Styrolution PS 1611 TDS SDS	6	222	460	6800	0.4
Easy flow material with excellent moldability	Styrolution PS 1621 TDS SDS	6	223	460	6800	0.4
High flow	Styrolution PS 1700 TDS SDS	11	223	430	5700	0.3
General purpose	Low residual styrene monomer content	Styrolution PS 2600/2601 TDS SDS	3.4	205	460	6400	0.4
Excellent toughness	Styrolution PS 2610 TDS SDS	3.6	208	460	6000	0.4
Good balance of flow, strength & set-up properties	Styrolution PS 3100/3101 TDS SDS	10	213	460	6500	0.4
Low residual styrene monomer content	Styrolution PS 3190/3191 TDS SDS	10	213	460	6500	0.4
Good balance of flow, strength & set-up properties	Styrolution PS 3600/3601 TDS SDS	14	209	460	6200	0.4